Greenacres Turf

Australia

Agriculture & Irrigation Filtaworx 2 × FW150 Australia

Overview

Greenacres Turf irrigates from bore-filled ponds through four pump stations. As part of an upgrade program, two of those stations moved to Filtaworx FW150 automatic self-cleaning filters.

The Challenge

Greenacres Turf runs four irrigation pump stations, each supplying several fields across the property through centre pivots and travelling irrigators.

The water comes from bore-filled ponds. Pond water carries suspended material, and at a turf farm every pump station feeds a large irrigated area, so whatever the filter lets through ends up in the irrigation equipment downstream.

Two of the existing filtration units were due for replacement. Whatever went in had to filter and clean itself automatically, and fit into the irrigation infrastructure already on the ground.

The Solution

Two Filtaworx FW150 Automatic Self-Cleaning Screen Filters, one at each of two separate pump stations.

Each filter carries a 200 micron screen and a hydraulic rinse controller, and runs at about 4 bar. The hydraulic controller cleans the screen with the line's own water pressure, so no operator has to be at the pump station for it.

Both units were fitted into the existing pipework, protecting the centre pivots and travelling irrigators fed by each station.

Greenacres Turf — installation photo 1 Greenacres Turf — installation photo 2

The Results

2 × FW150

Installed at two separate pump stations

200 µm

Screen protecting pivots and travelling irrigators

Automatic

Hydraulic screen cleaning at line pressure

Upgraded

Existing filtration replaced within current infrastructure

Facing a Similar Challenge?

Describe your application and our engineers will identify the right filter size, screen grade, and drive type for your operating conditions.